Home > Warnings and Cautions
Warnings and Cautions

Warnings, Definitions and Cautions Governing the Purchase, Sales and Use of all Sold Products: All products are sold subject to the following Warnings and Cautions and with the express understanding that the purchaser and/or user are thoroughly familiar with the product’s proper use. Susquehanna Wire Rope and ruggedtow.com assume no responsibility for the use, misuse or misapplication on any of its products.

Working Load Limit: The Working Load Limit or Safe Working Load is the maximum load which should ever be applied to the product under any condition. The Working Load Limit is based on a load being uniformly applied in a straight line pull.

Breaking Strength: Do NOT use Breaking Strength for design or rating purposes. Use the Working Load Limit instead. Breaking Strength is an average figure at which samples have been found to break under laboratory conditions in straight line pulls with constantly increasing loads. These conditions are rarely duplicated in actual use. The Breaking Strength applies to new and unused wire rod for Wire Rope, Aircraft Cable, and Chain.

Proof Load: The load a product can withstand during quality control test for the purpose of detecting defects and deformation in the material, usually twice the Working Load Limit.

Matching Components: All attachments used with chain and wire rope must be of suitable material, type and strength to provide adequate safety protection. Attachments should have Working Load Limits at least equal to the other components with which they are used.

Inspection Warning: No product can operate indefinitely at its rated capacity. Cable, wire rope, chain, and their attachments must be inspected regularly for visible damage, distortion, elongation, corrosion, cracks, nicks, or abrasion, which may cause failure or reduce the strength or ability of the product to perform safely.

Shock Loads: Loads which exceed the static caused by a rapid change of movement, such as jerking, impacting, or swinging of load. Working Load Limits will not apply.

Marking Requirements: The US Customs law requires that the end user of imported products be informed of the country of origin. All imported products sold by Advantage Sales & Supply Co., Inc. are marked accordingly. Re-sellers are responsible to relay this country of origin information to the end user.

Warnings: - No product can operate indefinitely at its rated capacity. - Avoid shock loads and side loads. - Keep out from under a raised load. - Never exceed the Working Load Limit.